MESCO Bright Finished Cold Rolled Steel Coil CRC sheet

Cold Rolled Steel Coil/Sheet (CR)

ABSOLUTE ADVANTAGE of supplying DC04 grade cold rolled steel with thickness below 0.4mm.

Rich experience of auto mobile steel with tensile strength higher than 900 MPa especially.

Specialized in offering drum application cold rolled steel.

20000 tons daily stock with nearly all grades, fast delivery.

Product Advantages 

1.The cold-rolled coil products are accurate in size, uniform in thickness, and the thickness difference of the coils generally does not exceed 0.01-0.03 mm or less, which can meet the requirements of high-precision tolerances.

2.It is possible to obtain extremely thin strips that cannot be produced by hot rolling (up to 0.001 mm or less).

3.The surface quality of cold-rolled products is superior, there are no defects such as pitting, hot-pressed iron oxide, etc.,which are often found in hot-rolled coils, and coils of different surface roughness (glossy or hemp) can be produced according to user requirements. Rough surface, etc., to facilitate the processing of the next process.

4.The cold rolled plate has a good mechanical properties and process properties (such as higher strength, lower yield limit, good deep drawability, etc.).

5.High-speed rolling and full-continuous rolling can be realized with high productivity.

Chemical Composition 

The Compare Table of Cold Rolling Low-carbon Steel Plate and Steel Strip Mark (For reference)

Mechanical Properties (For reference)