Prepainted steel (color coated steel) Part II
Future goods Market
Specification range
The thickness of prepainted steel that can be produced in China is 0.1-2.0mm.
The Boxing area of Shandong province mainly produces thin plates below 0.5mm, yes, it is read as Bo Xing, not Boxing, funning, right? Below 0.4mm, as the thickness becomes thinner and thinner, the price advantage is getting bigger and bigger, but the quality is really not good.
Private companies generally manufacture thin plates below 0.6mm. A few also make thick plates. Width is 600-1250mm.
Governmental enterprises generally produce thick plates above 0.5mm, and the thickest can be 1.5. The width is generally over 1000mm, with the widest being 1575mm.
Thickness description: Some customers will indicate BMT (Base Material Thickness) for the thickness written in the inquiry. If there is no special instructions, the default is TCT (Total Coated Thickness).
The inner diameter of the coil is 508/610mm, and the coil weight is 3-5 tons.
The factory packaging is eye to wall by default. If the customer requires a wooden pallet at the bottom, the extra cost is 50-80 yuan/ton.
The inner sleeve is divided into two types: cardboard tube and iron tube. By default, the weight of the inner sleeve is included in the net weight. If the customer requires the use of an iron inner sleeve and the net weight is not included, an additional price will be charged.
If the customer requires eye to sky packaging, a pallet must be added at the bottom, and the cost will increase by 80-150 yuan/ton.
The advantages are easy to transport, more solid, and can effectively avoid coil collapse. The condition of the inner sleeve is the same as that of eye to wall packaging.
Coating
The coating range of prepainted steel produced by private companies is from 20 to 275 grams for galvanized substrates and 30 to 150 grams for galvalume substrates, with most reaching 120 grams.
The actual factory standard zinc coating of prepainted steel in Boxing area is 8-12 grams, and most buyers may think it is 20-30 grams.
The color-coated steel produced by state-owned factories is more than 120 grams of galvanized and more than 90 grams of galvalume.
Grade
The common grade of prepainted steel is DX51D.
Deep-drawing grades are 52D-54D, and high-strength grades are S280GD-S550GD. Due to the elongation of the paint, drawing materials are generally up to 54D, not 57D.
The stamping grades of private companies are generally up to 53D, and high-strength grade is only S550.
State-owned enterprises can manufacture all grades, with soft materials up to 54D and hard materials up to 550.
Note: S400-500 is the most difficult range to produce. It is recommended to purchase it from state-owned steel mills or use 350/550 instead.
Protective film
In order to prevent the paint film from being damaged during transportation, the surface of the steel plate can be covered with a plastic protective film at a cost of about 1-2 yuan/square meter.
Minimum order quantity
The MOQ for ordinary coating or grade can be 25 tons.
That for high-grade or special grade or famous brand paint is generally 50 tons. If both or three are included, the MOQ is 100 tons.
Ready stock
Thickness range
The stock thickness generally starts from 0.3, and that below 0.3 is occasionally available.The thickest one in stock is generally 0.8mm, and 0.9/1.0 can occasionally be seen.
As the thickness increases, the market stock volume also increases, especially 0.4-0.8mm.
The width is mostly 1000/1200mm, and 1250 is relatively rare in stock.
Coating
The stock coating of prepainted steel of private companies is generally 10-20 grams, and high coating is rare.
Most of the stock coating of state-owned enterprises are galvanized 120 180 275, or aluminum zinc 120 150.
As one of the top ten agents in China, MESCO can check over 100,000 tons of stock goods through the internal systems of China's five major state-owned steel mills and the top ten private steel mills. This is determined by our strength, identity and status.
Color coated sheets
Color-coated sheets are generally out of stock.
If you need decoil with the length more than 2,000 mm, the cost is about 160-200 yuan, excluding short distance charge. There is a big difference with length below 2000mm, and we can quote according to customers’ requirements.
Prepainted steel strip
Prepainted steel strip cannot be directly customized and can only be slitted.
It can be made into small packages and small inner diameters, with an additional price of about 200 yuan per ton.
The cost of strip above 50mm is about 100-200 yuan, excluding the freight from the factory to the processing center.
As mentioned in the previous courses, the narrowest width that MESCO can divide is 6mm.
Follow MESCO STEEL, learn about steel products and China's steel industry with us!
MESCO STEEL is a professional steel products supplier.
Specialized in #Hot Rolled Steel, #Cold Rolled Steel, #Wear Resistant Steel, #Zn-Al-Mg Coated Steel, #Stainless Steel, #Aluminized Steel, #Powder Coated Steel, #Enamelled Pressed Steel, #PVC Laminated Steel, #Silicon Steel, #Tin Plate, #Aluminum Coil, #Steel structure, #Galvanized Steel, #Galvalume Steel, #PPGI, and #PPGL products.
The Largest Private Steel Supplier In Northeast China.
16 years, 78 countries, 480+ clients domestically and worldwide! No Stain In Reputation.
Wind Vane Company of price in mainstream media.
Council member enterprise of Chinese Steel Export Union.
Council member enterprise of Chinese Northeast Steel Structure Union.
Chinese top 20 coating steel supplier in 2019.
Chinese top 100 steel steel supplier in 2020.
Chinese top 30 coating steel supplier in 2020.